Speak directly to your contact person
+31 6 27 44 20 13WhatsAppEmail

Finishing · spray painting · lacquer

Spray finishing for an even, flawless surface.

Spray painting walls and ceilings, doors and frames in lacquer. Our own spray team currently has capacity in Amsterdam and the surrounding area.

Why spray

No roller or brush texture, just a flat layer.

Spraying applies paint as a thin, even mist. That gives a more uniform result than a roller or brush, particularly across large surfaces and on smooth plaster. Profiles, panels and frames are covered evenly too.

The result depends on the preparation: the surface must be flat and dust-free, and everything that must stay clean is fully masked and covered.

Spray finishing needs careful masking and good ventilation. We agree in advance which rooms must be available when, and whether you can stay in the property during the work.
Spraying ceilings

Even and consistent, including large or continuous surfaces.

Spraying walls

A uniform finish on new or repaired plasterwork.

Doors, frames & stairs

Lacquer spraying of joinery for a smooth, hard-wearing layer.

Preparation & masking

Repairing, sanding, dust removal, masking and priming.

From site visit to handover.

Site visit

Assess the surface, the areas and access.

Proposal

Agree colour, sheen, number of coats and planning.

Masking

Fully cover floors, furniture and adjoining work.

Spraying

Prime and finish in the agreed build-up.

Handover

Check the surfaces, remove masking, leave the space tidy.

Spraying or rolling?

Spraying is usually the better choice for large flat surfaces, new plasterwork, ceilings, and doors and frames where a smooth lacquer layer is wanted. Rolling stays more practical in small furnished rooms where masking takes longer than the spraying itself, and for local touch-ups.

We assess this room by room and will say plainly when rolling is the better value for you.

Also for contractors and property managers

We also spray for contractors, landlords and property managers, for example during tenancy turnovers or across several homes in sequence. Because we work with a fixed team, we can hold a continuous schedule.

Frequently asked questions.

Can I stay in the property while you spray?

Often yes, but not in the rooms being sprayed at that moment. We agree the sequence, drying times and ventilation in advance so you know which rooms are available when.

Does the plasterwork need to be finished first?

Yes. Spraying makes any unevenness more visible. We can plan plastering and spraying as one programme so drying times and sequence line up.

How disruptive is spraying?

The spraying itself is quick. Masking takes most of the time. We fully cover floors, furniture and adjoining areas, and remove the masking at handover.

How soon can you start?

We currently have our own spray capacity available. A site visit is usually possible within three working days, and work generally starts within two weeks.

What does spray finishing cost?

At 150 m² or more, spraying ceilings costs from €10.85 per m² including 9% VAT. For 60 to 149 m², the price is from €11.95 per m² including 9% VAT. Up to and including 59 m², the price is from €795 including 9% VAT. Masking, two coats and travel within our regular service area are included; floor protection and any parking costs are budgeted in advance. See the rates and conditions.

Spray finishing rates

Starting prices by area.

The larger the area, the lower the price per m². Masking and two coats of emulsion are included; additional costs are listed separately, so you can compare fairly.

Emulsion spraying

WorkIncl. VATExcl. VATCondition
Spraying ceilingsfrom €10.85 per m²from €9.95 per m²From 150 m², empty room
Spraying ceilingsfrom €11.95 per m²from €10.96 per m²60 to 149 m², empty room
Walls and ceilings togetherfrom €12.50 per m²from €11.47 per m²From 150 m², one colour, empty room
Small areafrom €795from €729.36Up to and including 59 m²

Additional costs

ItemIncl. VATExcl. VATNote
Floor protection with runnerfrom €2.73 per m²from €2.50 per m²Not needed if the floor is being replaced
Second or dark colourfrom €163.50 per colourfrom €150 per colourExtra masking and an extra spray pass
Sealingfrom €49.05 per hourfrom €45 per hourJoints and junctions, excluding materials
Travel costsincludedincludedWithin our regular service area
Parking costsactual costactual costAt the local rate, estimated in the quote in advance

Included

  • Masking of frames, doors, skirting and electrics
  • Two coats of emulsion, white or a light tint
  • Removal of masking and clean-up

Not included

  • Primer where the substrate requires it: quoted after the site visit
  • Plaster repairs beyond local touch-ups: see plastering
  • Furnished rooms: moving and covering furniture quoted separately
  • Nicotine, soot or grease-stained surfaces: stain-blocking primer quoted separately
  • Lacquer spraying of doors, frames and stairs: on request
  • Old textured ceilings that may contain asbestos: inspection by a certified company first
Our rates reflect an experienced spray finishing company in Amsterdam, with our own tradespeople and equipment. For private clients, the amount including VAT is shown next to every price.
The VAT rate depends on the work and the property. The 9% rate applies to qualifying painting and plastering work on homes older than two years; otherwise 21% may apply. After the site visit you receive a fixed, itemised quote in which all known additional costs are budgeted.
Additional work is carried out only after your written approval of the work and price.

Walls or ceilings to be sprayed?

We have room in the schedule now. Let us look at the rooms and give you a clear proposal.

Start your enquiry →

Tell us about your property.

Include the location, current situation and desired result. Photos help us understand the enquiry.

Up to 3 JPG, PNG or WebP photos; 4 MB per photo and 10 MB total.

CallEmailQuote